Engineering Perspectives | Jiarong Technology | November 16, 2026
Industrial membranes are increasingly used beyond wastewater discharge compliance. Mining, chemical and advanced-materials industries are evaluating separation for water reuse, brine concentration, purification and resource recovery.
For Jiarong Technology, this development builds on experience in landfill leachate and difficult industrial wastewater: characterize the liquid, define the objective and integrate the right technology.
Conventional wastewater projects focus on pollutant removal and treated-water quality. Resource-oriented projects ask additional questions: Can water be reused? Can a process chemical be recovered? Can a concentrated stream be managed more efficiently?
A membrane may separate water from salts, retain selected compounds or support downstream recovery. Value depends on feed chemistry, selectivity, energy, pretreatment, product quality and residual handling. Technical separation does not guarantee economic recovery.
Landfill leachate remains a core application of Jiarong's high-pressure membrane systems. Water quality changes with landfill age, rainfall and waste characteristics. Organic fouling, ammonia, dissolved salts and scaling potential can challenge conventional treatment processes.
DTRO (Disc Tube Reverse Osmosis) uses a disc-tube hydraulic configuration designed for difficult, fouling-prone wastewater. Appropriate pretreatment, cleaning and concentrate management remain essential.
Jiarong's published Shenyang Daxin project illustrates integrated treatment at scale. The facility developed through 800 m³/day and 2,100 m³/day capacity milestones, incorporating pretreatment, two-stage DTRO, high-pressure RO (HPRO), MTRO, ion exchange and evaporation.
The lesson: water production, high-pressure concentration, effluent assurance and residual management require coordinated design.
Industrial RO reject, mine water and chemical-process wastewater may contain substantial dissolved salts. Yet total dissolved solids (TDS) alone cannot determine the right membrane configuration. Calcium, magnesium, sulfate, silica, organics, temperature and pH influence fouling, scaling and achievable recovery.
At Jiarong's Hongqinghe coal mine water project, the published feed TDS for further membrane concentration was approximately 30,000 mg/L. The project reference describes two stages, each rated at 30 m³/h, and a design recovery range of 50–55%. These are project-specific design parameters, not guaranteed performance for other brines.
DTRO or STRO may be evaluated for suitable high-salinity concentration duties; evaporation or other downstream treatment may still be required. The practical endpoint depends on osmotic pressure, scaling risk, operating cost and the final concentrate route.
The key question is where membrane concentration remains stable and economically justified.
Acidic, alkaline and solvent-containing process streams create a different separation challenge: membrane compatibility and selectivity can matter as much as water recovery.
Jiarong's AMS portfolio includes chemically resistant membrane technologies intended for selected acid-, alkali- and solvent-related applications. Potential duties include process-stream purification, impurity separation and technical evaluation of acid or caustic reuse.
For example, a metal-bearing acidic stream may traditionally be neutralized, producing chemical consumption and solid residues. In a suitable case, selective membrane separation could be evaluated before neutralization or as part of a recovery process.
However, chemical resistance does not guarantee useful acid-metal separation. Membrane selectivity, concentration, temperature, pressure, product specifications and downstream processing must be verified. Laboratory or pilot testing may be necessary before commercial design.
This extends membrane engineering from end-of-pipe treatment into production-process separation.
Lithium brine processing, hydrometallurgy, battery-material manufacturing, chemical fiber production and phosphate-related processes involve complex liquid streams. Their separation objectives differ substantially.
Lithium brines: Magnesium, calcium, sodium, sulfate and chloride may complicate processing. Membranes can be investigated for defined purification or concentration duties, but conventional DTRO concentration is not equivalent to selective lithium extraction. Lithium selectivity requires a suitable technology and supporting test data.
Hydrometallurgy and battery materials: Chemically resistant membranes may support selected purification or separation stages in acid-containing process liquids. Any claim of chemical reuse or metal recovery depends on measured selectivity and integrated process design.
Chemical fiber and phosphate-related streams: Where recoverable chemicals coexist with impurities, membrane separation may be evaluated for compatible recovery or purification duties. Feasibility depends on the specific process chemistry.
These are application-development areas, not verified full-scale references without project evidence.
Across established wastewater applications and emerging resource-oriented processes, five requirements remain consistent:
Representative feed data: Ionic composition, contaminants, temperature, pH and variability.
A defined separation objective: Discharge, reuse, concentration, purification or chemical recovery.
Suitable pretreatment: Softening, solids separation or filtration where required.
Management of both outlet streams: Recovered liquid quality and remaining concentrate or residues.
Lifecycle evaluation: Energy, chemicals, cleaning, membrane replacement, equipment and downstream treatment.
EPC partners also need clear design assumptions, equipment interfaces, factory quality control and agreed commissioning responsibilities.
Jiarong's portfolio spans DTRO/STRO high-pressure membranes, tubular ultrafiltration (TUF), containerized treatment systems, AMS chemically resistant membranes and I-FLASH MVR evaporation technology.
According to its published company profile, Jiarong completed more than 600 engineering projects across its portfolio by the end of 2025 and supplied equipment to multiple international markets.
Established project experience supports expansion, but new applications still require independent validation.
Can DTRO treat any high-salinity wastewater? No. Suitability depends on water chemistry, osmotic pressure, scaling and fouling risks, pretreatment and equipment limits.
Can chemically resistant membranes recover acid or alkali? They may support compatible separation or purification duties. Practical recovery requires demonstrated selectivity and process economics.
Does membrane concentration achieve ZLD by itself? No. Permeate and concentrate remain separate streams; complete ZLD may also require evaporation, crystallization or other residual treatment.
The growing role of membrane separation links difficult wastewater treatment with wider industrial resource-management challenges. Landfill leachate, high-salinity brine and chemically aggressive process streams demand different technologies, yet all require the same discipline: characterize the feed, define the intended separation and verify the full process.
Jiarong Technology continues to build on its established wastewater expertise while evaluating how advanced membrane engineering can contribute to industrial purification, water reuse and resource recovery.
Reliable separation begins with a clearly defined process objective—not an equipment preference.
Jiarong company profile: https://www.jiarong.com/about
Shenyang Daxin project: https://www.jiarong.com/casesinfo/32
Hongqinghe mine water project: https://www.jiarong.com/casesinfo/34
AMS membrane portfolio: https://www.jiarong.com/proinfo/75
ZLD process integration: https://www.jiarong.com/proinfo/74
Share your water quality data and discharge requirements, we'll help assess a feasible and stable treatment approach
Submit